$5,857.00/Each

Ships free with

for details

Due to a manufacturer's price increase, this price will increase by 10.00% to 15.00% on 05/15/25
Accessories & Options

What We Offer

shield icon

Protect Your Product

Coverage starting at $159.33 info icon

Commercial Product Protection Plan from Safeware

Safeware, own with confidence logo

You just chose a mega-quality product, but coverage from manufacturer's warranties are limited. Safeware's product protection will cover all that's included in the manufacturer's warranty in addition to:

  • Mechanical and Electrical Failure, after the manufacturer's warranty expires
  • Day One Power Surge Protection
  • Day One Food Spoilage Credit
  • No Deductibles or Service Fees
  • Backed by an AM Best A-Rated Insurer
Choose your Protection Plan:

Product protection coverage begins from day one that the manufacturer's warranty starts. Products are only eligible for an extended warranty if used in a commercial setting. Non-commercial use may result in a loss of coverage. For more information on whether the item has a manufacturer's warranty and what is covered, please refer to the warranty information in our Resources Downloads section of the item's page. Learn More opens in a new tab

Please see terms and conditions opens a PDF document for coverage details including limitations, exclusions and providers info. The Obligor in TX is National Product Care Company dba Texas National Product Care Company, Inc.

Earn up to $175.71 back (17,571 points)with a Webstaurant Rewards Visa® Credit Card

Add to Wish List

Usually Ships in 1-2 Business Days from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Features (1) 8 liter hopper for single flavor dispensing
  • Digital controls and display allow for easy adjustment of system settings
  • Automatic shut-off if low temperatures or motor overload are detected
  • Standby mode and quick freeze mode maintain or rapidly decrease temperature for quick service
  • Self-closing valve prevents messes and overflow; ensures portion control
UPC Code:400014289260
View all Spaceman Commercial Ice Cream Makers

Works With

Add frozen treats to your menu with this Spaceman 6210-C countertop soft serve ice cream machine with 1 hopper.

Pairing precision engineering with a smart, common-sense design, this Spaceman single flavor countertop soft serve freezer will give your customers the ice cream, custard, and desserts they crave while offering you the simple operation you need to keep your business running smoothly! This budget-conscious unit is equipped with (1) 1.2 liter freezing cylinder and (1) 8 liter mix hopper, and while it may be small enough to fit on a countertop, it can still produce up to 18 quarts per hour!

  • ETL, US & Canada

    ETL, US & Canada

    This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in the United States and Canada.

  • ETL Sanitation

    ETL Sanitation

    This product has been certified by ETL, a division of the Intertek Group, to meet applicable sanitation standards required for use in the United States and Canada.

  • CE Listed

    CE Listed

    This product complies with the standards imposed by Conformance European (CE).

  • 5-20P

    5-20P

    This unit comes with a NEMA 5-20P plug.

Rated 5 out of 5 stars

"This soft serve machine is great it cools down so fast which if you have used soft serve machines you know how much waste there can be from it not freezing fast enough. It works much better than some others that I have used it is also very easy to disassemble and clean. It al..."

Read More Reviews

Quality System, Quality Ice Cream

This unit features a patented freezing cylinder design that freezes faster and more efficiently than any competitor, a tight-fitting beater, and a precision-engineered air tube that allows separate suction of air and product each time the beater turns. This translates to smaller ice crystals and a smoother finished product. It also means you get the most consistent overrun control of any gravity-fed machine, so you can count on each batch coming out with the same texture every time!

Standby Mode

When you close for the day, this machine stays busy by maintaining the product temperature inside the hopper and freezer cylinder at below 40 degrees Fahrenheit, ensuring the contents stay at the correct safe temperature and ensuring the machine is ready for use the next day.

Quick Freeze Function

A high-efficiency heat exchanger works quickly while consuming minimal energy to provide rapid freezing. If you need to serve right away, this unit includes a quick freeze mode that immediately freezes the contents down to serving viscosity after the machine has been idle.

Digital Controls

A digital display and controls ensure you're always aware of the machine's status and can quickly make adjustments to its settings. It even boasts automatic programming capabilities, so you can quickly switch between preset operation modes or schedules.

Plug and Play Setup

This unit ships with an 8’ cord and plug included so that you can install and use it right out of the box to serve delicious signature desserts, with no need to call an electrician for wiring. It is 110V. This machine will automatically shut off if it detects low temperatures or motor overload, and it features a high pressure switch that can prevent the compressor from overheating during a busy day.

User-Friendly Design

A self-closing valve eliminates overflow, drips, and spills, ensuring portion control and decreasing product waste and cleanup. You can also control the dispensing speed, so you won't overfill cones or bowls. You won't even have to worry about running out of mix, since a light and alarm will alert you to low mix levels.

Smart Engineering

A direct drive transmission increases the machine's efficiency and does not include consumable moving parts, allowing the machine to operate safely and more efficiently. In addition, the scraper blades feature a 1-piece design, which cuts down on the number of parts to clean and maintain. Precision engineering and extra care taken in the welds and junctions, particularly in the hopper area, ensure that you’re getting a product that will last.

Questions & Answers

Looking For Specific Info? Get quick answers to product questions with our AI-powered search.

Ask about this product

Frequently Asked Questions From Customers

Can my Spaceman Soft Serve machine serve gelato?
This machine can only be used with soft serve style mixes of gelato, custard, yogurt, ice cream, and sorbet.

0:00 / 0:00

Watch More Videos

  • How-To Video for the Spaceman Soft Serve Gravity Machine (SSG)
  • Spaceman Countertop Soft Serve Machines

How-To Video for the Spaceman Soft Serve Gravity Machine (SSG)

This easy-to-follow, how-to video will help you learn how to start, clean, and assemble your Spaceman gravity fed soft serve machine in no time!

More Video Resources

The first step to cleaning your soft serve machine is draining the product. First press the reset button to stop the freeze function. Press the wash button to dispense product from the freezing cylinder in the hopper. Dispense all the product. Then add cold, clean or sanitizer water. You should use a brush to help thoroughly clean the inside area and remove debris. Drain the water. Rinse and repeat. You can continue this process until the water is flowing out of the dispensing door clear.

Now we'll disassemble the machine. First switch the power to off or press the reset button. Next remove the dispensing door. Remove the dispensing door assembly from the cylinders. And disassemble the dispensing door by first removing the bearings from the door assembly. Remove the gasket from the door assembly using the O-ring removal tool. Remove the prime plugs and the prime plugs O-rings. To remove the handles, first remove the retention nut and then slide out the retention pin from the handles. Then remove the draw handles, pushing down first to pop up the draw valves. Then pulling out. Remove the draw valves and twist while removing to prevent damage to the O-rings. Note the center valve has an H-style O-ring. Remove the O-rings. You can use the O-ring removal tool if it's helpful. Next, rotate the star cap so that the tabs are accessible, and snap off the caps. Now remove and disassemble the beater assemblies. Take the beaters out of the freezing cylinder. And remove the blades from the beater assembly. Remove the drive shafts from inside the cylinder using a dry towel. If you're unable to fit you arm into the cylinder, you can use the provided drive shaft removal tool. Separate the gasket from the drive shaft. Remove the front drip tray. Remove the side internal drip tray. Now wash the machine. Verify the power switch is in the off position and use the large provided brush and cool water to thoroughly clean the inside of the cylinder. Use a brush to clean the inside of the drive shaft bearing. Removing the lubricant and debris from the back. Clean the back well. Gently clean and wipe down the outside of the machine. Use one of the provided brushes to clean out the inlet hole in the hopper. Ensure all external surfaces on the machine are clean and then you can wash the parts.

Now, we'll reassemble the machine. Never force the installation of any parts. First, we'll install the drive shaft seal. Put the gasket onto the drive shaft and lubricate. Pack lubricant into the gasket and up the length of the drive shaft, but don't get lubricant on the top key area or the square area. Insert the drive shaft into the rear shell bearing at the back of the cylinders and turn until the key engages firmly into the socket. Gently place both scraper blades on to the beater assembly. And then insert the beater assembly into the freezing cylinder. Rotate the beater until it engages the drive shaft and no longer turns.

Dispensing door assembly. First, we'll install the O-rings on the prime plugs. There's two O-rings per prime plug. Next, we'll install the O-rings on the dispensing valves. Start with the side valves, which have two O-rings each and the move on to the center valve with the H O-ring. Coat all O-rings with spaceman lubricant prior to placing in their position. Put the prime plugs into the prime plug holes. And then place the valves into the valve holes. Starting with the center valve so that you don't forget where it goes. You can use your finger as a guide to allow room for the handles to go in later. Rotate the valves while pressing in so as not to cause damage to the O-rings. Set the draw handles into the slots on the dispensing door and valve area with the adjustment screws on the handle facing down. Slide the retention pin through the draw handles and secure with the nut. Fit the door gaskets into the grooves on the back of the door. Flat side out. These go on one way only. Then you can slide the beater guides over the beater rods with the flanged edge against the door. Snap the star caps on to the bottom of the dispensing door. Insert the dispensing door assembly into the cylinders, beater rods first, pushing the handles all the way up as you insert. Secure the door assembly in a cross pattern using hand screws, with the long hand screws on top. Coat the inside of the agitators with spaceman lubricant and install with the arrow pointing up. Place the front drip tray on the front of the machine and the side internal drip tray on the side of the machine.

Sanitation. Pour a food grade, no rinse sanitizer solution into each hopper and then turn the power switch on. Press the reset button, and then press the wash button. Allow the solution to agitate for 5 to 10 minutes. While agitating, gently use a clean brush to scrub and distribute sanitizer solution along the hopper walls. Place the bucket below the door and then open the prime plugs to rinse that area. Then open the draw valve to drain all the product from the freezing cylinder and the hopper area. Make sure to drain all the product in the machine. Press the reset button to stop the wash cycle.

Adding the product. Only use a product that has been manufactured specifically for soft serve machines. Ensure the product is thoroughly mixed and refrigerated prior to adding to the hopper. Place a bucket below the dispensing door and add a bit of product to the hopper. Then pull the draw valve down to purge out any sanitizer that's left. Pour the remaining product into the hopper. Then, raise the prime plug on the top of the dispensing door until the flow is 100% product. This sets the product level in the freezing cylinder. Push the prime plug back down and install the air tube in the hopper with the inlet hole on the side of the air cove at the bottom. Freezing product. Press the reset and then the freeze button. The motor will begin to agitate the product and the cooling system will begin. Freezing product may take up to 10 minutes. When the product reaches the set viscosity it is ready to dispense.

Overall Dimensions:
Width:
11 3/16 Inches
Depth:
25 5/8 Inches
Height:
29 11/16 Inches
Capacity:
8 Liters

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Need Parts & Accessories?

Shop replacement parts and accessories for this item today!

Resources and Downloads

7156210CX Spaceman Soft Serve Spec SheetSpecsheet7156210CX Spaceman Operator ManualManualSpaceman Electrical Guide - All Models 7156210CXInstructions7156210CX Size Guide Soft ServeInstructionsSpaceman Warranty WarrantySpaceman_Size Guide All ModelsSize GuideSpaceman_Pre-installation ChecklistInstallation Checklist

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Warranty only valid once training is complete. Please contact Customer Solutions for details.

INTERNATIONAL USERS:For users outside the United States, Spaceman offers a one year part warranty. Any labor costs incurred by an onsite technician are not covered.
Condensers must be cleaned annually (at a minimum) and documented by buyer in order to maintain the compressor warranty. RESIDENTIAL USERS: Spaceman assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.

Resources

  • Hard & Soft Serve Ice Cream Machine Guide

    • Specs

    Quantity
    1/Each
    Shipping Weight
    203 lb.
    Width
    11 3/16 Inches
    Depth
    25 5/8 Inches
    Height
    29 11/16 Inches
    Hertz
    60 Hz
    Phase
    1 Phase
    Voltage
    110 Volts
    Capacity
    8 Liters
    Capacity per Compartment
    8 Liters
    Installation Type
    Countertop
    Number of Hoppers
    1 Hopper
    Output
    18 Quarts Per Hour
    Plug Type
    NEMA 5-20P
    Type
    Soft Serve Ice Cream Machines Sorbet Machines

    Equivalent Items

    Spaceman 6210 110-115/60/1
    Spaceman 6220 120/60/1

    Customer Reviews

    5.0

    Rated 5 out of 5 stars

    4 Customer Reviews

    4 reviews rated this 5 out of 5 stars.

    0 reviews rated this 4 out of 5 stars.

    0 reviews rated this 3 out of 5 stars.

    0 reviews rated this 2 out of 5 stars.

    0 reviews rated this 1 out of 5 stars.

    Customers Say

    Customers appreciate this soft serve machine for its fast cooling, ease of cleaning, and user-friendly operation. It's praised for its ability to meet high demand efficiently, making it suitable for both restaurants and food trucks. The machine's compact design and reliable performance over time are also highlighted, along with helpful customer service for operational guidance.

    • machine
    • serve
    • soft
    • spaceman
    • easy
    • clean
    • great
    • machines
    • food
    • love

    This AI-generated summary was created from real customer reviews

    Rated 5 out of 5 stars
    Rated 5 out of 5 stars
    Review by

    Clayton D.

    Posted on 10/03/2021

    Verified Purchase

    This soft serve machine is great it cools down so fast which if you have used soft serve machines you know how much waste there can be from it not freezing fast enough. It works much better than some others that I have used it is also very easy to disassemble and clean. It also comes with free phone training they did it via FaceTime so I learned how to operate all the functions of the machine and all of the adjustments very easily. It has been used for about a year now no issues works great. It is a great space saver you can tuck it in on a countertop we actually have it in a food truck.

    21 out of 22 found this review helpful

    Rated 5 out of 5 stars
    Rated 5 out of 5 stars
    Review by

    Monty K. from Daddy's Dogs & More

    Posted on 01/05/2023

    Verified Purchase

    We have been using the Spaceman 6210C for 6 months. I had concerns that it would not keep up with the demand for our restaurant, but we can make about 3 ice cream cones or 2 milkshakes every minute with it. With a little bit of thought, it has been more than enough to keep up with the demand, even when we are busy. It has been super easy to clean and maintain. We clean it twice a week, and it takes about 30 minutes each time. It is a great machine for the money!

    9 out of 9 found this review helpful

    Rated 5 out of 5 stars
    Rated 5 out of 5 stars
    Review by

    Summer B.

    Posted on 05/14/2023

    Verified Purchase

    I just opened my first food truck .Im a Soft serve ice cream business and also serve another product. The Space Man soft serve machine is what I ordered . I want the best and after research The Spaceman has not disappointed. It’s very user friendly. The consistency is perfect and adjustable . I’m not tech savvy but the instruction for use and cleaning are easy to apply . I’m happy and pleased with my Space Man machine purchase and will definitely buy a 2nd machine in the near future . A friend of mine who works in a shop in Ca and is also using a Spaceman saw my FB and IG post about my new Mobil food truck reached out to me sharing our similarity of our taste in soft serve machine.

    5 out of 5 found this review helpful

    Rated 5 out of 5 stars
    Rated 5 out of 5 stars
    Review by

    Matt M.

    Posted on 09/09/2024

    Verified Purchase

    We love Spaceman! We are on our third Spaceman 6210-C Soft Serve Machine after trying out inferior products. We love how easy it is to assemble, clean, and program the machines. Customer service is also super helpful! Very clear and attentive when we needed further instruction on how to change the viscosity of our machines. Soft serve is a staple of our restaurant and Spaceman makes it so easy to provide customers what they love. Thank you Spaceman! 10/10!

    Customer Photos & Videos

    Leave a review of this product!

    Customers can receive promotional credit when they post reviews.

    Review this product

    Spaceman 6210-C Countertop Soft Serve Ice Cream Machine with 1 Hopper - 110V, 1 Phase

    #7156210CX

    Product Rating (required)

    Did this product satisfy your needs?

    Add a photo or video

    Accepted file types: .jpg, .png, .mpg, mpeg, mov, avi, wmv, mp4 (max file size: 25MB for photos and 300MB for videos)


    This form is protected by reCAPTCHA and the Google
    Privacy Policy and Terms of Service apply.

    Find Related Products

    1 quart plastic containers   countertop ice machines   flake ice machine   ice cream cone jacket   nugget ice machine   sonic ice machine