LightSaver Portable Solar Charger (LS-1)
.jpeg?width=200&height=400&name=LightSaver%20Portable%20Solar%20Charger%20rolled%20up%20and%20on%20its%20side%20(200%20x%20400).jpeg "LightSaver Portable Solar Charger rolled up and on its side")
.jpg?width=400&height=440&name=LightSaver%20Portable%20Solar%20Charger%20unrolled%20(400%20x%20440).jpg "LightSaver Portable Solar Charger unrolled")
Specifications
-
Battery: 3200mAh
-
Weight: 4.9oz / 138.9g
-
Power In: Solar / USB
-
Power Out: 1 USB (5V, 1A Max current, Typical current 0.25A-0.75A depending on device)
-
Solar Charge: 6-8 hours full sun
-
Wall Charge: 3 hours
-
Dimensions
-
Rolled: 7.8 x 1.5 (in) / 198.1 x 38.1 (mm)
-
Unrolled: 7.8 x 18.5 (in) / 198.1 x 469.9 (mm)
-
Shipping Notes:
- This item is only available via ground shipment in North America (excluding Hawaii and Alaska) due to battery certification restrictions for international shipments.
- Join the waiting list to be notified when the LightSaver is available internationally by clicking the orange button below.
- The product will ship two to three days after placing the order.
- Your billing and shipping address MUST MATCH to process your order. If you have questions, please contact us.
- Description
- Important Notes
- How It Works
- Where To Buy
- Resources
"Our LightSaver was a phone life saver. We brought it with us on our 10,000-mile road trip across the U.S., utilizing it on lengthy drives and long hikes. There were times we didn't have access to regular electricity, and our LightSaver kept our phones powered by the sun by day and by charger at night. The best part is that it's lightweight and small enough to store without taking up space."
- Justin and Ariele Champion of Wild We Wander
Made from Military grade thin-film solar technology that can take bullets and continue to perform, the LightSaver's durability is unmatched.
The LightSaver’s flexible solar module wraps around the outside of the core, taking up minimal space in your pack, pocket, or bag. When ready to recharge the LightSaver, unroll the panel to expose it to the sun.
Once fully charged, roll it up, toss it into your pack, and enjoy extended battery life on your hike or trip. A convenient micro-USB port allows you to pre-charge the LightSaver before leaving home.
Perfect for charging cell phones, GoPro's GPS tracking devices, and other small electronics.
Cables Included:
Micro-USB Charging Cable
Charge the LightSaver at least once every three months for the best battery performance. If the LightSaver’s battery is completely drained, it may need to charge for a few minutes before the indicator light illuminates. Always store the LightSaver in a cool environment with a battery charged over 50 percent.
A little water on the LightSaver is not a problem, but allowing significant water inside the unit may corrode components. Saltwater is particularly corrosive and should be kept out of the device.
The LightSaver collects energy from the sun when available, storing it in the internal battery. That energy is then available to charge a USB device anytime, eliminating the need to leave your device out in the sun. Using its micro USB input, the LightSaver can also be charged from the wall or other USB sources.
When a device is plugged in, the LightSaver will charge the device until fully charged or the LightSaver is fully discharged. The LightSaver turns on automatically with no button push required. If the LightSaver is fully discharged, the output will remain on until its battery has been charged to at least 10%. This protects against draining a device’s battery by turning it on and off, which is common in many other solar chargers.
The LightSaver is not designed to charge a device from the solar panel directly. Instead, the solar panel charges the internal battery, which is available to provide power to other devices once charged.
United States
Ships Domestically
International
Canada
Not sure which LightSaver is right for you? Read: How to Power Devices Anywhere with Flexible LightSaver Solar Charging Solutions.